2 Specifications
|
Item |
Description |
|
Corresponding Standard |
JAMMA standard *1 " |
|
Dimension |
268mm x 230mm x 30mm |
|
Weight |
580g |
|
Input power source |
[Connected to JAMMA standard terminal ] +5V ±5% (2.5A or more) and +12V ±5% (2.0A or more) |
|
Temperature : 0°C - 50°C, Humidity : 10% - 85% (no condensation) | |
|
Cabinets applicable to connect |
Cabinets corresponding to JAMMA standard |
|
Direction of the monitor and the monitor signal |
Direction of the monitor : Sideways Type of scanning retrace line : Switchable to non-interlace / interlace Horizontal synchronizing frequency : 15.75kHz Vertical synchronizing frequency : 60.0Hz |
|
Control panel |
4-direction joystick 1x2 Button switch 1 x 2 Startswitch 1x2 |
|
How to install it on cabinets |
Fix to the wooden install board of the cabinet |
*1 JAMMA standard (JAMMA STANDARD; abbreviated as JS)
Standards on the edge connectors for video game machine PC boards provided by Japan Amusement Machine Manufacturers Association (JAMMA) in 1986
3. CHECK OF PACKAGE
This product consists of the following items when out of the factory. KflMlsEl • Be sure to check that all the items are included.
• If there is something missing, contact your distributor.
# Save the packing materials in case of storage and transportation of this product.
- List of items in the package
|
No. |
Item |
Remarks |
Quantity |
|
© |
Mr. DRILLER2 PC Board |
1 | |
|
© |
Operation Manual |
This operation manual |
1 |
|
© |
Title Sheet |
The logotype of Mr. DRILLER2 is printed. |
1 |
|
© |
A Sticker * |
List of basic techniques, rectangular sheet. |
1 |
|
© |
B Sticker * |
Control instructions, rectangular sheet. |
1 |
* The release type of adhesive is used on the adhesive side of the A sticker, B sticker and Button Seal. Refer to the chapter "11. REPLACEMENT PARTS LIST" on p.50 for the service parts.
4. COMPONENTS
PC Board
Post a comment