Operators Manual
It is the responsibility of the operator to maintain customer SAFETY AT ALL TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL ARE FOLLOWED PRECISELY,
Part No. 90500089
© 1996 NAMCO LIMITED. all rights reserved.
No part of this publication may be reproduced by any mechanical, photographic or electronic process, or in the form of phonographic recording, nor may it be stored in a retrieval system, transmitted or otherwise copied for public or private use, without permission from NAMCO EUROPE LIMITED
While the information contained in this manual is given in good faith and was accurate at the time of publication, NAMCO EUROPE LIMITED reserve the right to make changes and alterations without notice.
This machine has been manufactured in accordance with European Community directives (1st. January 1996), and as such bears the Q £ marking. Any changes or modifications to this machine must be in accordance with European Community directives (1st. January 1996).
If you make any unauthorised changes to this product, you may contravene European Community directives (1st. January 1996).
Under some conditions of extreme external interference, e.g. radio transmissions, electrostatic discharge or mains borne transients, some degradation of performance may occur. However the machine will recover normal performance once the source of interference has ceased or been removed.
Following abnormally high voltage surges on the mains supply the video monitor may need to be manually reset by turning the machine OFF and back ON.
Published by:
NAMCO EUROPE LIMITED Namco House, 8 Acton Park Estate, The Vale, London W3. 7QE
Phone:- 0208-324-6000 Fax:- 0208-324-6010
Post a comment